Swissmann

INSPECTION GAGES

 

  

 

  

 

 


 
  MODEL SR-9 
ID Groove Diameter Gage

DETAILED SPECIFICATIONS

  Made in USA

 

 

 

 

All dimensions are in inches.
Accessories included with the SR-9 gage 
Threaded Extensions: These extensions screw together for sizing the gage to the diameter to be checked.  The lengths are .250, .375, .500, .625, .750, .875, 1.000, 2.000, 3.000, and 4.000.
 

Contact Tips: 5 pairs come with the gage. They are hardened, radiused and polished.
The dimensions of the Tips are as follows:
Pair 1  .048 diameter x .110 Tip Height.
Pair 2  .048 diameter x .155 Tip height.
Pair 3  .090 diameter x .260 Tip height.
Pair 4  .100 diameter x .380 Tip height.

Pair 5  .187 diameter x .500 Tip height.

Important Note: The Extensions and Contact Tips have standard 4-48 threads, the same thread used on standard dial indicator accessory tips. This means that the gage can be used with the great variety of 4-48 threaded accessories readily available everywhere, to adapt the gage to special jobs, or to extend it to larger sizes.
 

 

Inreach into a 2.00 ID or larger diameter. . . . . . . . . . .

9.8 (Gage will actually reach in 10".)

Inreach into an ID as small as 1.50 diameter. . . . . . .

6.0

 

 

Smallest ID checked  . . . . . . . . . . . . . . . . . . . . . . . . . . .

1.5 diameter

Largest ID checked . . . . . . . . . . . . . . . . . . . . . . . . . . . .

over 11 inches

 

 

Retraction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

over .800

Groove diameter can exceed bore diameter by . . . .

.800

Smallest groove width  . . . . . . . . . . . . . . . . . . . . . . . . .

.050 (Checks grooves down to .050 wide.)


Dial Indicator:  premium, jeweled, .0005" graduations.
Digital: The SR-9 will accept digital indicators or transducers with a neck diameter of .371 to .375.
 

 

Illustrated Instructions . . . . . . . . . . . . . . . . . . . . . . . . .

Complete instructions for setup and use.

Inspection Report . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
 

Documents the tested repeating accuracy and other QC checks, by serial number.

Weight  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

1 pound, 8 ounces

Overall length . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

13.5"

Overall height . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

6.0

Finish . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Baked enamel hard coat.

Polymer Storage case outside dimensions  . . . . . . .

17 x 12 x 3.5"  (see picture above)


For technical assistance or for
free extra copies of the Instructions . . . . . . . . . . . . . .



   Call:  760-223-0663
Back to Main SR-9 Page   Phone:  (760) 223-0663
Home       Page 4a of 7, Rev M
Contact Us   Email: IDgages@Gmail.com