Swissmann

INSPECTION GAGES

  

 

  

 


 

MODEL SR-13  ID Groove Diameter Gage

DETAILED SPECIFICATIONS
 Made in USA

All dimensions are in inches.

 

 

Accessories included with the SR-13 gage 
Threaded Extensions: These extensions screw together for sizing the gage to the diameter to be checked.  The lengths are .250, .375, .500, .625, .750, .875, 1.000, 2.000, 3.000, and 4.000.
 

Contact Tips: 5 pairs come with the gage. They are hardened, radiused and polished.
The dimensions of the Tips are as follows:
Pair 1  .048 diameter x .110 Tip height.
Pair 2  .048 diameter x .155 Tip height.
Pair 3  .090 diameter x .260 Tip height.
Pair 4  .100 diameter x .380 Tip height.

Pair 5  .187 diameter x .500 Tip height.

Important Note: The Extensions and Contact Tips have standard 4-48 threads, the same thread used on standard dial indicator accessory tips.  This means that the gage can be used with the tremendous variety of dial indicator accessories which are readily available everywhere to adapt the gage to special jobs, or to extend it to larger sizes.
  

 

Inreach into a 2.00 ID or larger diameter . . . . . . . . . . 

13.8 (Gage will actually reach in 14".)

Inreach into an ID as small as 1.50 diameter . . . . . . .

7.00

 

 

Smallest ID checked  . . . . . . . . . . . . . . . . . . . . . . . . . .

1.50 diameter

Largest ID checked  . . . . . . . . . . . . . . . . . . . . . . . . . . .

over 11 inches

 

 

Retraction  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

over .800

Groove diameter can exceed bore diameter by  . . .

.800

Smallest groove width . . . . . . . . . . . . . . . . . . . . . . . . . 

.050 (Checks grooves down to .050 wide.)


Dial Indicator:  Premium-grade dial indicator with .0005" graduations, made in USA.
Digital: The SR-13 will accept digital indicators or transducers with a neck diameter of .371 to .375.
 

 

Illustrated Instructions . . . . . . . . . . . . . . . . . . . . . . . . 

Complete instructions for setup and use.

Inspection Report . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Documentation of the tested repeating accuracy and other QC checks, by serial number.

Weight  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

1 pound, 13 ounces

Overall length . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

17.5"

Overall height . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

6.0

Finish . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Baked enamel hard coat.


For technical assistance or for
free extra copies of the Instructions . . . . . . . . . . . .



Call: 760-378-4036
 


Back to Main SR-13 Page
PRINT THIS PAGE     Phone (760) 378-4036
Home         Back to top of page   Fax (760) 378-2577
Contact Us     Email  Gulfgage@aol.com